MirBSD manpage: perlsyn(1)

PERLSYN(1)      Perl Programmers Reference Guide       PERLSYN(1)


     perlsyn - Perl syntax


     A Perl program consists of a sequence of declarations and
     statements which run from the top to the bottom.  Loops,
     subroutines and other control structures allow you to jump
     around within the code.

     Perl is a free-form language, you can format and indent it
     however you like.  Whitespace mostly serves to separate
     tokens, unlike languages like Python where it is an impor-
     tant part of the syntax.

     Many of Perl's syntactic elements are optional.  Rather than
     requiring you to put parentheses around every function call
     and declare every variable, you can often leave such expli-
     cit elements off and Perl will figure out what you meant.
     This is known as Do What I Mean, abbreviated DWIM.  It
     allows programmers to be lazy and to code in a style with
     which they are comfortable.

     Perl borrows syntax and concepts from many languages: awk,
     sed, C, Bourne Shell, Smalltalk, Lisp and even English.
     Other languages have borrowed syntax from Perl, particularly
     its regular expression extensions.  So if you have pro-
     grammed in another language you will see familiar pieces in
     Perl.  They often work the same, but see perltrap for infor-
     mation about how they differ.


     The only things you need to declare in Perl are report for-
     mats and subroutines (and sometimes not even subroutines).
     A variable holds the undefined value ("undef") until it has
     been assigned a defined value, which is anything other than
     "undef".  When used as a number, "undef" is treated as 0;
     when used as a string, it is treated as the empty string,
     ""; and when used as a reference that isn't being assigned
     to, it is treated as an error.  If you enable warnings,
     you'll be notified of an uninitialized value whenever you
     treat "undef" as a string or a number.  Well, usually.
     Boolean contexts, such as:

         my $a;
         if ($a) {}

     are exempt from warnings (because they care about truth
     rather than definedness).  Operators such as "++", "--",
     "+=", "-=", and ".=", that operate on undefined left values
     such as:

perl v5.8.8                2006-06-30                           1

PERLSYN(1)      Perl Programmers Reference Guide       PERLSYN(1)

         my $a;

     are also always exempt from such warnings.

     A declaration can be put anywhere a statement can, but has
     no effect on the execution of the primary sequence of
     statements--declarations all take effect at compile time.
     Typically all the declarations are put at the beginning or
     the end of the script.  However, if you're using lexically-
     scoped private variables created with "my()", you'll have to
     make sure your format or subroutine definition is within the
     same block scope as the my if you expect to be able to
     access those private variables.

     Declaring a subroutine allows a subroutine name to be used
     as if it were a list operator from that point forward in the
     program.  You can declare a subroutine without defining it
     by saying "sub name", thus:

         sub myname;
         $me = myname $0             or die "can't get myname";

     Note that myname() functions as a list operator, not as a
     unary operator; so be careful to use "or" instead of "||" in
     this case.  However, if you were to declare the subroutine
     as "sub myname ($)", then "myname" would function as a unary
     operator, so either "or" or "||" would work.

     Subroutines declarations can also be loaded up with the
     "require" statement or both loaded and imported into your
     namespace with a "use" statement. See perlmod for details on

     A statement sequence may contain declarations of lexically-
     scoped variables, but apart from declaring a variable name,
     the declaration acts like an ordinary statement, and is ela-
     borated within the sequence of statements as if it were an
     ordinary statement.  That means it actually has both
     compile-time and run-time effects.


     Text from a "#" character until the end of the line is a
     comment, and is ignored.  Exceptions include "#" inside a
     string or regular expression.

     Simple Statements

     The only kind of simple statement is an expression evaluated
     for its side effects.  Every simple statement must be ter-
     minated with a semicolon, unless it is the final statement

perl v5.8.8                2006-06-30                           2

PERLSYN(1)      Perl Programmers Reference Guide       PERLSYN(1)

     in a block, in which case the semicolon is optional.  (A
     semicolon is still encouraged if the block takes up more
     than one line, because you may eventually add another line.)
     Note that there are some operators like "eval {}" and "do
     {}" that look like compound statements, but aren't (they're
     just TERMs in an expression), and thus need an explicit ter-
     mination if used as the last item in a statement.

     Truth and Falsehood

     The number 0, the strings '0' and '', the empty list "()",
     and "undef" are all false in a boolean context. All other
     values are true. Negation of a true value by "!" or "not"
     returns a special false value. When evaluated as a string it
     is treated as '', but as a number, it is treated as 0.

     Statement Modifiers

     Any simple statement may optionally be followed by a SINGLE
     modifier, just before the terminating semicolon (or block
     ending).  The possible modifiers are:

         if EXPR
         unless EXPR
         while EXPR
         until EXPR
         foreach LIST

     The "EXPR" following the modifier is referred to as the
     "condition". Its truth or falsehood determines how the
     modifier will behave.

     "if" executes the statement once if and only if the condi-
     tion is true.  "unless" is the opposite, it executes the
     statement unless the condition is true (i.e., if the condi-
     tion is false).

         print "Basset hounds got long ears" if length $ear >= 10;
         go_outside() and play() unless $is_raining;

     The "foreach" modifier is an iterator: it executes the
     statement once for each item in the LIST (with $_ aliased to
     each item in turn).

         print "Hello $_!\n" foreach qw(world Dolly nurse);

     "while" repeats the statement while the condition is true.
     "until" does the opposite, it repeats the statement until
     the condition is true (or while the condition is false):

perl v5.8.8                2006-06-30                           3

PERLSYN(1)      Perl Programmers Reference Guide       PERLSYN(1)

         # Both of these count from 0 to 10.
         print $i++ while $i <= 10;
         print $j++ until $j >  10;

     The "while" and "until" modifiers have the usual ""while"
     loop" semantics (conditional evaluated first), except when
     applied to a "do"-BLOCK (or to the deprecated
     "do"-SUBROUTINE statement), in which case the block executes
     once before the conditional is evaluated.  This is so that
     you can write loops like:

         do {
             $line = <STDIN>;
         } until $line  eq ".\n";

     See "do" in perlfunc.  Note also that the loop control
     statements described later will NOT work in this construct,
     because modifiers don't take loop labels.  Sorry.  You can
     always put another block inside of it (for "next") or around
     it (for "last") to do that sort of thing. For "next", just
     double the braces:

         do {{
             next if $x == $y;
             # do something here
         }} until $x++ > $z;

     For "last", you have to be more elaborate:

         LOOP: {
                 do {
                     last if $x = $y**2;
                     # do something here
                 } while $x++ <= $z;

     NOTE: The behaviour of a "my" statement modified with a
     statement modifier conditional or loop construct (e.g. "my
     $x if ...") is undefined.  The value of the "my" variable
     may be "undef", any previously assigned value, or possibly
     anything else.  Don't rely on it.  Future versions of perl
     might do something different from the version of perl you
     try it out on.  Here be dragons.

     Compound Statements

     In Perl, a sequence of statements that defines a scope is
     called a block. Sometimes a block is delimited by the file
     containing it (in the case of a required file, or the pro-
     gram as a whole), and sometimes a block is delimited by the
     extent of a string (in the case of an eval).

perl v5.8.8                2006-06-30                           4

PERLSYN(1)      Perl Programmers Reference Guide       PERLSYN(1)

     But generally, a block is delimited by curly brackets, also
     known as braces. We will call this syntactic construct a

     The following compound statements may be used to control

         if (EXPR) BLOCK
         if (EXPR) BLOCK else BLOCK
         if (EXPR) BLOCK elsif (EXPR) BLOCK ... else BLOCK
         LABEL while (EXPR) BLOCK
         LABEL while (EXPR) BLOCK continue BLOCK
         LABEL until (EXPR) BLOCK
         LABEL until (EXPR) BLOCK continue BLOCK
         LABEL foreach VAR (LIST) BLOCK
         LABEL foreach VAR (LIST) BLOCK continue BLOCK
         LABEL BLOCK continue BLOCK

     Note that, unlike C and Pascal, these are defined in terms
     of BLOCKs, not statements.  This means that the curly brack-
     ets are required--no dangling statements allowed.  If you
     want to write conditionals without curly brackets there are
     several other ways to do it.  The following all do the same

         if (!open(FOO)) { die "Can't open $FOO: $!"; }
         die "Can't open $FOO: $!" unless open(FOO);
         open(FOO) or die "Can't open $FOO: $!";     # FOO or bust!
         open(FOO) ? 'hi mom' : die "Can't open $FOO: $!";
                             # a bit exotic, that last one

     The "if" statement is straightforward.  Because BLOCKs are
     always bounded by curly brackets, there is never any ambi-
     guity about which "if" an "else" goes with.  If you use
     "unless" in place of "if", the sense of the test is

     The "while" statement executes the block as long as the
     expression is true (does not evaluate to the null string ""
     or 0 or "0"). The "until" statement executes the block as
     long as the expression is false. The LABEL is optional, and
     if present, consists of an identifier followed by a colon.
     The LABEL identifies the loop for the loop control state-
     ments "next", "last", and "redo". If the LABEL is omitted,
     the loop control statement refers to the innermost enclosing
     loop.  This may include dynamically looking back your call-
     stack at run time to find the LABEL.  Such desperate
     behavior triggers a warning if you use the "use warnings"
     pragma or the -w flag.

perl v5.8.8                2006-06-30                           5

PERLSYN(1)      Perl Programmers Reference Guide       PERLSYN(1)

     If there is a "continue" BLOCK, it is always executed just
     before the conditional is about to be evaluated again.  Thus
     it can be used to increment a loop variable, even when the
     loop has been continued via the "next" statement.

     Loop Control

     The "next" command starts the next iteration of the loop:

         LINE: while (<STDIN>) {
             next LINE if /^#/;      # discard comments

     The "last" command immediately exits the loop in question.
     The "continue" block, if any, is not executed:

         LINE: while (<STDIN>) {
             last LINE if /^$/;      # exit when done with header

     The "redo" command restarts the loop block without evaluat-
     ing the conditional again.  The "continue" block, if any, is
     not executed. This command is normally used by programs that
     want to lie to themselves about what was just input.

     For example, when processing a file like /etc/termcap. If
     your input lines might end in backslashes to indicate con-
     tinuation, you want to skip ahead and get the next record.

         while (<>) {
             if (s/\\$//) {
                 $_ .= <>;
                 redo unless eof();
             # now process $_

     which is Perl short-hand for the more explicitly written

         LINE: while (defined($line = <ARGV>)) {
             if ($line =~ s/\\$//) {
                 $line .= <ARGV>;
                 redo LINE unless eof(); # not eof(ARGV)!
             # now process $line

perl v5.8.8                2006-06-30                           6

PERLSYN(1)      Perl Programmers Reference Guide       PERLSYN(1)

     Note that if there were a "continue" block on the above
     code, it would get executed only on lines discarded by the
     regex (since redo skips the continue block). A continue
     block is often used to reset line counters or "?pat?" one-
     time matches:

         # inspired by :1,$g/fred/s//WILMA/
         while (<>) {
             ?(fred)?    && s//WILMA $1 WILMA/;
             ?(barney)?  && s//BETTY $1 BETTY/;
             ?(homer)?   && s//MARGE $1 MARGE/;
         } continue {
             print "$ARGV $.: $_";
             close ARGV  if eof();           # reset $.
             reset       if eof();           # reset ?pat?

     If the word "while" is replaced by the word "until", the
     sense of the test is reversed, but the conditional is still
     tested before the first iteration.

     The loop control statements don't work in an "if" or
     "unless", since they aren't loops.  You can double the
     braces to make them such, though.

         if (/pattern/) {{
             last if /fred/;
             next if /barney/; # same effect as "last", but doesn't document as well
             # do something here

     This is caused by the fact that a block by itself acts as a
     loop that executes once, see "Basic BLOCKs and Switch State-

     The form "while/if BLOCK BLOCK", available in Perl 4, is no
     longer available.   Replace any occurrence of "if BLOCK" by
     "if (do BLOCK)".

     For Loops

     Perl's C-style "for" loop works like the corresponding
     "while" loop; that means that this:

         for ($i = 1; $i < 10; $i++) {

     is the same as this:

perl v5.8.8                2006-06-30                           7

PERLSYN(1)      Perl Programmers Reference Guide       PERLSYN(1)

         $i = 1;
         while ($i < 10) {
         } continue {

     There is one minor difference: if variables are declared
     with "my" in the initialization section of the "for", the
     lexical scope of those variables is exactly the "for" loop
     (the body of the loop and the control sections).

     Besides the normal array index looping, "for" can lend
     itself to many other interesting applications.  Here's one
     that avoids the problem you get into if you explicitly test
     for end-of-file on an interactive file descriptor causing
     your program to appear to hang.

         $on_a_tty = -t STDIN && -t STDOUT;
         sub prompt { print "yes? " if $on_a_tty }
         for ( prompt(); <STDIN>; prompt() ) {
             # do something

     Using "readline" (or the operator form, "<EXPR>") as the
     conditional of a "for" loop is shorthand for the following.
     This behaviour is the same as a "while" loop conditional.

         for ( prompt(); defined( $_ = <STDIN> ); prompt() ) {
             # do something

     Foreach Loops

     The "foreach" loop iterates over a normal list value and
     sets the variable VAR to be each element of the list in
     turn.  If the variable is preceded with the keyword "my",
     then it is lexically scoped, and is therefore visible only
     within the loop.  Otherwise, the variable is implicitly
     local to the loop and regains its former value upon exiting
     the loop.  If the variable was previously declared with
     "my", it uses that variable instead of the global one, but
     it's still localized to the loop.  This implicit localisa-
     tion occurs only in a "foreach" loop.

     The "foreach" keyword is actually a synonym for the "for"
     keyword, so you can use "foreach" for readability or "for"
     for brevity.  (Or because the Bourne shell is more familiar
     to you than csh, so writing "for" comes more naturally.)  If
     VAR is omitted, $_ is set to each value.

perl v5.8.8                2006-06-30                           8

PERLSYN(1)      Perl Programmers Reference Guide       PERLSYN(1)

     If any element of LIST is an lvalue, you can modify it by
     modifying VAR inside the loop.  Conversely, if any element
     of LIST is NOT an lvalue, any attempt to modify that element
     will fail.  In other words, the "foreach" loop index vari-
     able is an implicit alias for each item in the list that
     you're looping over.

     If any part of LIST is an array, "foreach" will get very
     confused if you add or remove elements within the loop body,
     for example with "splice".   So don't do that.

     "foreach" probably won't do what you expect if VAR is a tied
     or other special variable.   Don't do that either.


         for (@ary) { s/foo/bar/ }

         for my $elem (@elements) {
             $elem *= 2;

         for $count (10,9,8,7,6,5,4,3,2,1,'BOOM') {
             print $count, "\n"; sleep(1);

         for (1..15) { print "Merry Christmas\n"; }

         foreach $item (split(/:[\\\n:]*/, $ENV{TERMCAP})) {
             print "Item: $item\n";

     Here's how a C programmer might code up a particular algo-
     rithm in Perl:

         for (my $i = 0; $i < @ary1; $i++) {
             for (my $j = 0; $j < @ary2; $j++) {
                 if ($ary1[$i] > $ary2[$j]) {
                     last; # can't go to outer :-(
                 $ary1[$i] += $ary2[$j];
             # this is where that last takes me

     Whereas here's how a Perl programmer more comfortable with
     the idiom might do it:

perl v5.8.8                2006-06-30                           9

PERLSYN(1)      Perl Programmers Reference Guide       PERLSYN(1)

         OUTER: for my $wid (@ary1) {
         INNER:   for my $jet (@ary2) {
                     next OUTER if $wid > $jet;
                     $wid += $jet;

     See how much easier this is?  It's cleaner, safer, and fas-
     ter.  It's cleaner because it's less noisy.  It's safer
     because if code gets added between the inner and outer loops
     later on, the new code won't be accidentally executed.  The
     "next" explicitly iterates the other loop rather than merely
     terminating the inner one.  And it's faster because Perl
     executes a "foreach" statement more rapidly than it would
     the equivalent "for" loop.

     Basic BLOCKs and Switch Statements

     A BLOCK by itself (labeled or not) is semantically
     equivalent to a loop that executes once.  Thus you can use
     any of the loop control statements in it to leave or restart
     the block.  (Note that this is NOT true in "eval{}",
     "sub{}", or contrary to popular belief "do{}" blocks, which
     do NOT count as loops.)  The "continue" block is optional.

     The BLOCK construct is particularly nice for doing case

         SWITCH: {
             if (/^abc/) { $abc = 1; last SWITCH; }
             if (/^def/) { $def = 1; last SWITCH; }
             if (/^xyz/) { $xyz = 1; last SWITCH; }
             $nothing = 1;

     There is no official "switch" statement in Perl, because
     there are already several ways to write the equivalent.

     However, starting from Perl 5.8 to get switch and case one
     can use the Switch extension and say:

             use Switch;

     after which one has switch and case.  It is not as fast as
     it could be because it's not really part of the language
     (it's done using source filters) but it is available, and
     it's very flexible.

     In addition to the above BLOCK construct, you could write

perl v5.8.8                2006-06-30                          10

PERLSYN(1)      Perl Programmers Reference Guide       PERLSYN(1)

         SWITCH: {
             $abc = 1, last SWITCH  if /^abc/;
             $def = 1, last SWITCH  if /^def/;
             $xyz = 1, last SWITCH  if /^xyz/;
             $nothing = 1;

     (That's actually not as strange as it looks once you realize
     that you can use loop control "operators" within an expres-
     sion.  That's just the binary comma operator in scalar con-
     text.  See "Comma Operator" in perlop.)


         SWITCH: {
             /^abc/ && do { $abc = 1; last SWITCH; };
             /^def/ && do { $def = 1; last SWITCH; };
             /^xyz/ && do { $xyz = 1; last SWITCH; };
             $nothing = 1;

     or formatted so it stands out more as a "proper" "switch"

         SWITCH: {
             /^abc/      && do {
                                 $abc = 1;
                                 last SWITCH;

             /^def/      && do {
                                 $def = 1;
                                 last SWITCH;

             /^xyz/      && do {
                                 $xyz = 1;
                                 last SWITCH;
             $nothing = 1;


         SWITCH: {
             /^abc/ and $abc = 1, last SWITCH;
             /^def/ and $def = 1, last SWITCH;
             /^xyz/ and $xyz = 1, last SWITCH;
             $nothing = 1;

perl v5.8.8                2006-06-30                          11

PERLSYN(1)      Perl Programmers Reference Guide       PERLSYN(1)

     or even, horrors,

         if (/^abc/)
             { $abc = 1 }
         elsif (/^def/)
             { $def = 1 }
         elsif (/^xyz/)
             { $xyz = 1 }
             { $nothing = 1 }

     A common idiom for a "switch" statement is to use
     "foreach"'s aliasing to make a temporary assignment to $_
     for convenient matching:

         SWITCH: for ($where) {
                     /In Card Names/     && do { push @flags, '-e'; last; };
                     /Anywhere/          && do { push @flags, '-h'; last; };
                     /In Rulings/        && do {                    last; };
                     die "unknown value for form variable where: `$where'";

     Another interesting approach to a switch statement is
     arrange for a "do" block to return the proper value:

         $amode = do {
             if     ($flag & O_RDONLY) { "r" }       # XXX: isn't this 0?
             elsif  ($flag & O_WRONLY) { ($flag & O_APPEND) ? "a" : "w" }
             elsif  ($flag & O_RDWR)   {
                 if ($flag & O_CREAT)  { "w+" }
                 else                  { ($flag & O_APPEND) ? "a+" : "r+" }


             print do {
                 ($flags & O_WRONLY) ? "write-only"          :
                 ($flags & O_RDWR)   ? "read-write"          :

     Or if you are certain that all the "&&" clauses are true,
     you can use something like this, which "switches" on the
     value of the "HTTP_USER_AGENT" environment variable.

perl v5.8.8                2006-06-30                          12

PERLSYN(1)      Perl Programmers Reference Guide       PERLSYN(1)

         # pick out jargon file page based on browser
         $dir = 'http://www.wins.uva.nl/~mes/jargon';
         for ($ENV{HTTP_USER_AGENT}) {
             $page  =    /Mac/            && 'm/Macintrash.html'
                      || /Win(dows )?NT/  && 'e/evilandrude.html'
                      || /Win|MSIE|WebTV/ && 'm/MicroslothWindows.html'
                      || /Linux/          && 'l/Linux.html'
                      || /HP-UX/          && 'h/HP-SUX.html'
                      || /SunOS/          && 's/ScumOS.html'
                      ||                     'a/AppendixB.html';
         print "Location: $dir/$page\015\012\015\012";

     That kind of switch statement only works when you know the
     "&&" clauses will be true.  If you don't, the previous "?:"
     example should be used.

     You might also consider writing a hash of subroutine refer-
     ences instead of synthesizing a "switch" statement.


     Although not for the faint of heart, Perl does support a
     "goto" statement.  There are three forms: "goto"-LABEL,
     "goto"-EXPR, and "goto"-&NAME.  A loop's LABEL is not actu-
     ally a valid target for a "goto"; it's just the name of the

     The "goto"-LABEL form finds the statement labeled with LABEL
     and resumes execution there.  It may not be used to go into
     any construct that requires initialization, such as a sub-
     routine or a "foreach" loop.  It also can't be used to go
     into a construct that is optimized away.  It can be used to
     go almost anywhere else within the dynamic scope, including
     out of subroutines, but it's usually better to use some
     other construct such as "last" or "die".  The author of Perl
     has never felt the need to use this form of "goto" (in Perl,
     that is--C is another matter).

     The "goto"-EXPR form expects a label name, whose scope will
     be resolved dynamically.  This allows for computed "goto"s
     per FORTRAN, but isn't necessarily recommended if you're
     optimizing for maintainability:

         goto(("FOO", "BAR", "GLARCH")[$i]);

     The "goto"-&NAME form is highly magical, and substitutes a
     call to the named subroutine for the currently running sub-
     routine.  This is used by "AUTOLOAD()" subroutines that wish
     to load another subroutine and then pretend that the other
     subroutine had been called in the first place (except that

perl v5.8.8                2006-06-30                          13

PERLSYN(1)      Perl Programmers Reference Guide       PERLSYN(1)

     any modifications to @_ in the current subroutine are pro-
     pagated to the other subroutine.)  After the "goto", not
     even "caller()" will be able to tell that this routine was
     called first.

     In almost all cases like this, it's usually a far, far
     better idea to use the structured control flow mechanisms of
     "next", "last", or "redo" instead of resorting to a "goto".
     For certain applications, the catch and throw pair of
     "eval{}" and die() for exception processing can also be a
     prudent approach.

     PODs: Embedded Documentation

     Perl has a mechanism for intermixing documentation with
     source code. While it's expecting the beginning of a new
     statement, if the compiler encounters a line that begins
     with an equal sign and a word, like this

         =head1 Here There Be Pods!

     Then that text and all remaining text up through and includ-
     ing a line beginning with "=cut" will be ignored.  The for-
     mat of the intervening text is described in perlpod.

     This allows you to intermix your source code and your docu-
     mentation text freely, as in

         =item snazzle($)

         The snazzle() function will behave in the most spectacular
         form that you can possibly imagine, not even excepting
         cybernetic pyrotechnics.

         =cut back to the compiler, nuff of this pod stuff!

         sub snazzle($) {
             my $thingie = shift;

     Note that pod translators should look at only paragraphs
     beginning with a pod directive (it makes parsing easier),
     whereas the compiler actually knows to look for pod escapes
     even in the middle of a paragraph.  This means that the fol-
     lowing secret stuff will be ignored by both the compiler and
     the translators.

perl v5.8.8                2006-06-30                          14

PERLSYN(1)      Perl Programmers Reference Guide       PERLSYN(1)

         =secret stuff
          warn "Neither POD nor CODE!?"
         =cut back
         print "got $a\n";

     You probably shouldn't rely upon the "warn()" being podded
     out forever. Not all pod translators are well-behaved in
     this regard, and perhaps the compiler will become pickier.

     One may also use pod directives to quickly comment out a
     section of code.

     Plain Old Comments (Not!)

     Perl can process line directives, much like the C preproces-
     sor.  Using this, one can control Perl's idea of filenames
     and line numbers in error or warning messages (especially
     for strings that are processed with "eval()").  The syntax
     for this mechanism is the same as for most C preprocessors:
     it matches the regular expression

         # example: '# line 42 "new_filename.plx"'
         /^\#   \s*
           line \s+ (\d+)   \s*
           (?:\s("?)([^"]+)\2)? \s*

     with $1 being the line number for the next line, and $3
     being the optional filename (specified with or without

     There is a fairly obvious gotcha included with the line
     directive: Debuggers and profilers will only show the last
     source line to appear at a particular line number in a given
     file.  Care should be taken not to cause line number colli-
     sions in code you'd like to debug later.

     Here are some examples that you should be able to type into
     your command shell:

         % perl
         # line 200 "bzzzt"
         # the `#' on the previous line must be the first char on line
         die 'foo';
         foo at bzzzt line 201.

perl v5.8.8                2006-06-30                          15

PERLSYN(1)      Perl Programmers Reference Guide       PERLSYN(1)

         % perl
         # line 200 "bzzzt"
         eval qq[\n#line 2001 ""\ndie 'foo']; print $@;
         foo at - line 2001.

         % perl
         eval qq[\n#line 200 "foo bar"\ndie 'foo']; print $@;
         foo at foo bar line 200.

         % perl
         # line 345 "goop"
         eval "\n#line " . __LINE__ . ' "' . __FILE__ ."\"\ndie 'foo'";
         print $@;
         foo at goop line 345.

perl v5.8.8                2006-06-30                          16

Generated on 2022-12-24 01:00:14 by $MirOS: src/scripts/roff2htm,v 1.113 2022/12/21 23:14:31 tg Exp $ — This product includes material provided by mirabilos.

These manual pages and other documentation are copyrighted by their respective writers; their sources are available at the project’s CVSweb, AnonCVS and other mirrors. The rest is Copyright © 2002–2022 MirBSD.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report — diffs preferred.

Kontakt / Impressum & Datenschutzerklärung