MirBSD manpage: CGI::Fast(3p)

CGI::Fast(3p)   Perl Programmers Reference Guide    CGI::Fast(3p)


     CGI::Fast - CGI Interface for Fast CGI


         use CGI::Fast qw(:standard);
         $COUNTER = 0;
         while (new CGI::Fast) {
             print header;
             print start_html("Fast CGI Rocks");
                 h1("Fast CGI Rocks"),
                 "Invocation number ",b($COUNTER++),
                 " PID ",b($$),".",
             print end_html;


     CGI::Fast is a subclass of the CGI object created by CGI.pm.
     It is specialized to work well with the Open Market FastCGI
     standard, which greatly speeds up CGI scripts by turning
     them into persistently running server processes.  Scripts
     that perform time-consuming initialization processes, such
     as loading large modules or opening persistent database con-
     nections, will see large performance improvements.


     In order to use CGI::Fast you'll need a FastCGI-enabled Web
     server.  Open Market's server is FastCGI-savvy.  There are
     also freely redistributable FastCGI modules for NCSA httpd
     1.5 and Apache. FastCGI-enabling modules for Microsoft
     Internet Information Server and Netscape Communications
     Server have been announced.

     In addition, you'll need a version of the Perl interpreter
     that has been linked with the FastCGI I/O library.  Precom-
     piled binaries are available for several platforms, includ-
     ing DEC Alpha, HP-UX and SPARC/Solaris, or you can rebuild
     Perl from source with patches provided in the FastCGI
     developer's kit.  The FastCGI Perl interpreter can be used
     in place of your normal Perl without ill consequences.

     You can find FastCGI modules for Apache and NCSA httpd,
     precompiled Perl interpreters, and the FastCGI developer's
     kit all at URL:



     FastCGI scripts are persistent: one or more copies of the
     script are started up when the server initializes, and stay
     around until the server exits or they die a natural death.

perl v5.8.8                2005-02-05                           1

CGI::Fast(3p)   Perl Programmers Reference Guide    CGI::Fast(3p)

     After performing whatever one-time initialization it needs,
     the script enters a loop waiting for incoming connections,
     processing the request, and waiting some more.

     A typical FastCGI script will look like this:

         #!/usr/local/bin/perl    # must be a FastCGI version of perl!
         use CGI::Fast;
         while ($q = new CGI::Fast) {

     Each time there's a new request, CGI::Fast returns a CGI
     object to your loop.  The rest of the time your script waits
     in the call to new().  When the server requests that your
     script be terminated, new() will return undef.  You can of
     course exit earlier if you choose.  A new version of the
     script will be respawned to take its place (this may be
     necessary in order to avoid Perl memory leaks in long-
     running scripts).

     CGI.pm's default CGI object mode also works.  Just modify
     the loop this way:

         while (new CGI::Fast) {

     Calls to header(), start_form(), etc. will all operate on
     the current request.


     See the FastCGI developer's kit documentation for full
     details.  On the Apache server, the following line must be
     added to srm.conf:

         AddType application/x-httpd-fcgi .fcgi

     FastCGI scripts must end in the extension .fcgi.  For each
     script you install, you must add something like the follow-
     ing to srm.conf:

         FastCgiServer /usr/etc/httpd/fcgi-bin/file_upload.fcgi -processes 2

     This instructs Apache to launch two copies of
     file_upload.fcgi at startup time.


     Any script that works correctly as a FastCGI script will
     also work correctly when installed as a vanilla CGI script.
     However it will not see any performance benefit.

perl v5.8.8                2005-02-05                           2

CGI::Fast(3p)   Perl Programmers Reference Guide    CGI::Fast(3p)


     FastCGI supports a TCP/IP transport mechanism which allows
     FastCGI scripts to run external to the webserver, perhaps on
     a remote machine.  To configure the webserver to connect to
     an external FastCGI server, you would add the following to
     your srm.conf:

         FastCgiExternalServer /usr/etc/httpd/fcgi-bin/file_upload.fcgi -host sputnik:8888

     Two environment variables affect how the "CGI::Fast" object
     is created, allowing "CGI::Fast" to be used as an external
     FastCGI server.  (See "FCGI" documentation for
     "FCGI::OpenSocket" for more information.)

         The address (TCP/IP) or path (UNIX Domain) of the socket
         the external FastCGI script to which bind can listen for
         incoming connections from the web server.

         Maximum length of the queue of pending connections.

     For example:

         #!/usr/local/bin/perl    # must be a FastCGI version of perl!
         use CGI::Fast;
         $ENV{FCGI_SOCKET_PATH} = "sputnik:8888";
         $ENV{FCGI_LISTEN_QUEUE} = 100;
         while ($q = new CGI::Fast) {


     I haven't tested this very much.


     Copyright 1996-1998, Lincoln D. Stein.  All rights reserved.

     This library is free software; you can redistribute it
     and/or modify it under the same terms as Perl itself.

     Address bug reports and comments to: lstein@cshl.org


     This section intentionally left blank.


     CGI::Carp, CGI

perl v5.8.8                2005-02-05                           3

Generated on 2022-12-24 01:00:14 by $MirOS: src/scripts/roff2htm,v 1.113 2022/12/21 23:14:31 tg Exp $ — This product includes material provided by mirabilos.

These manual pages and other documentation are copyrighted by their respective writers; their sources are available at the project’s CVSweb, AnonCVS and other mirrors. The rest is Copyright © 2002–2022 MirBSD.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report — diffs preferred.

Kontakt / Impressum & Datenschutzerklärung